Assembling And Operating - Westfalia 85 91 93 Mode D'emploi

Assembling and Operating

1. Turn the motor unit (3) upside down
and mount the desired mash (6, 7 or
8) on the motor unit by using the
wing screws.
Simultaneously
screws on the unit and make sure
the wing screws are tightly fastened.
By doing this the contact safety
switches will be fully pressed down.
2. Now turn around the motor unit and
place the motor unit on the collecting
bin (5).
3. Lock both parts together with the
quick locks (4).
4. Place the filling bin (1) on the motor
unit. Lock the filling bin with the
included mounting material (washer,
retainer ring, wing nut).
5. Fill the grist into the filling bin and
cover the filling bin with the dust
cover, in order to avoid spilling
during operation.
6. Insert the power plug into a wall
socket and press the ON/OFF switch (2) to switch on the feed
mill. During operation wear hearing protection.
If the motor does not function, please check if the wing screws
are tightly screwed on the unit, so the contact safety switches are
activated.
Operation
screw the
18
wing