Safety Notes - Westfalia 85 91 93 Mode D'emploi

 Operate the feed mill only under supervision.
 Check the feed mill and the electrical connections for damage
and do not use the feed mill, if the motor or the cable is
damaged.
 Ensure that the feed mill is switched off before disconnecting
the power plug from the wall outlet.
 Do not use the feed mill when your reactivity is affected by
alcohol consumption, medication, drugs, illness or tiredness.
 Do not move or transport the feed mill while operation.
 Do not expose the feed mill to moisture and do not immerse
the feed mill in water or other liquids.
 Keep the feed mill away from potentially explosive locations.
 Consider the slow-down time of the feed mill after switching
off.
 Check the feed mill and the electrical connections for any
damage and do not use the tool if the feed mill or the cable is
damaged.
 Switch off the feed mill when the unit is not in use, after
finishing work and before undertaking maintenance and then
disconnect the power cord from the mains supply.
 In the event of an electrical or mechanical malfunction,
immediately switch off the feed mill and do not use it further.
 Do not carry the feed mill by the power cord. Keep the power
cord away from hot, sharp edges and moving parts.
 Do not wear jewellery and loose clothing. Tie up long hair.
 Do not disassemble the feed mill and do not try to repair it
yourself. Have the unit repaired by a professional or contact
our customer support service. Always use original replace-
ment parts.
 The unit is intended for use up to 2000 m above sea level.

Safety Notes

6