Publicité
Les langues disponibles
Les langues disponibles
Turning on/off the key-touch tone
You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. When shipped from the factory, the key-touch tone is activated.
• ON:
Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "BEEP" with
3. Select the desired mode with the control dial.
The key-touch tone alternates between on and off.
Selecting the scroll mode
You can select the scroll mode for the name display and disc information if it consists of more
than 8 characters. When shipped from the factory, Auto Scroll mode is set to "ONCE."
• ONCE: Scrolls only once
• AUTO: Repeats the scroll (5-second intervals in between)
• OFF:
Cancels Auto Scroll
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "SCROLL" with
3. Select the desired mode with the control dial.
The scroll mode changes as follows:
Note:
Even if the scroll mode is set to "OFF," you can scroll the display by pressing DISP for more than 1
second.
Selecting the subwoofer cutoff frequency
When a subwoofer is connected to this unit, select an appropriate cutoff frequency level for
your subwoofer. When shipped from the factory, the subwoofer cutoff frequency is set to
"MID."
• MID:
Frequencies higher than 80 Hz are cut off to the subwoofer.
• HIGH: Frequencies higher than 120 Hz are cut off to the subwoofer.
• LOW:
Frequencies higher than 50 Hz are cut off to the subwoofer.
1. Press and hold SEL (Select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select "CUTOFF F" with
3. Select the desired mode with the control dial.
The subwoofer cutoff frequency changes as follows:
28
¢ or
4.
ON
OFF
¢ or
ONCE
AUTO
¢ or
MID
HIGH
4.
OFF
4.
LOW
Publicité
