Sauder 418652 Manuel D'instructions page 9

Step 4
Fasten the BACK MOLDINGS (W) to the BACKS (I and J).
å
Use four BLACK 9/16" LARGE HEAD SCREWS (1S) through
the BRACKETS and into the MOLDINGS.
NOTE: There are no pre-drilled holes in the BACK
å
MOLDINGS. The SCREWS will tighten into the grooves.
These edges should be even.
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
www.sauder.com/services
These edges should be even.
W
1S
J
Curved edge
418652
W
I
Groove
Page 9