Replacing The Desiccant - Derksen PHOS 25 Conditions D'utilisation

5.4. Rotating the motif
1. Loosen the knurled screw until the gobo holder can be
rotated.
2. Rotate the gobo holder until the motif has been
aligned as desired.
3. Tighten the knurled screw.

5.5. Replacing the desiccant

Moisture that condenses in the projector head head is ab-
sorbed by the desiccant. This process can take several days.
If the desiccant is used up, replace it with a new one:
1. Loosen the two cylinder head screws and remove the
desiccant holder from the support rail.
2. Remove the used desiccant bag.
3. Carefully press the new desiccant bag into the cage so
that the two recesses for the screw heads of the lens
holder are exposed.
4. Mount the desiccant holder with the two cylinder
head screws.
PHOS pole mount
Se�ng up and opera�ng
41 / 76