Inser�Ng/Changing The Gobo - Derksen PHOS 25 Conditions D'utilisation

5.1. Inser�ng/changing the gobo
1. Loosen the knurled screw.
2. Remove the gobo holder.
3. Unscrew the gobo holder.
4. Insert the gobo into the holder with the motif back-to-
front. The front side must face the light source. (Note:
Touch only the edges of the gobo when inserting it into
the holder.)
5. Ensure that the gobo is placed flat in the holder.
6. Screw the gobo holder together. Carefully press
against the gobo so that it is firmly and securely posi-
tioned in the holder.
A. Front side: The coated side of the gobo. The front
side faces the light source.
B. Dark side: The dark part of the coating can be seen
through the glass. The dark side faces the projection
lens.
7. Insert the gobo holder into the projector head.
8. Tighten the knurled screw.
PHOS pole mount
Se�ng up and opera�ng
39 / 76