Télécharger Imprimer la page

Waterway CLEARWATER II Instructions D'installation

Les langues disponibles

Télécharger ce manuel

INSTALLATION INSTRUCTIONS FOR ATTACHING CLEARWATER II FILTER

LID HANDLE AND REMOVAL OF LID ASSEMBLY

819-9002 (2)

Using a Phillips-head screwdriver, screw the two (2) provided Phillips-

head screws through the handle assembly and into the filter lid, as

shown. Make snug; DO NOT overtighten.

INSTALLATION INSTRUCTIONS FOR ATTACHING CLEARWATER II FILTER

1. Align the drain port of the filter body to the base as shown.

2. Use one of the two self-threading screws provided. Screw it into the filter

body as shown.

3. Using the other self-threading screw, screw it into the filter body on the

opposite side.

4. Continue the installation of the filter according to the filter instructions.

Designed,

Engineered &

Manufactured

in the USA.

519-7601

BODY TO THE CLEARWATER II FILTER BASE

For product registration visit: www.waterwayplastics.com.

For Warranty questions or claims please contact point of purchase.

2200 East Sturgis Road, Oxnard CA 93030 • Phone 805.981.0262 • Fax 805.981.9403

www.waterwayplastics.com • waterway@waterwayplastics.com

TO REMOVE LID ASSEMBLY:

Remove lock-nut assembly. Insert wrench in notch between filter body

and lid assembly as shown. Twist wrench to separate.

WARRANTY

810-0212-EFS.0220

Page 1 INSTALLATION INSTRUCTIONS FOR ATTACHING CLEARWATER II FILTER LID HANDLE AND REMOVAL OF LID ASSEMBLY 519-7601 819-9002 (2) TO REMOVE LID ASSEMBLY: Using a Phillips-head screwdriver, screw the two (2) provided Phillips- head screws through the handle assembly and into the filter lid, as Remove lock-nut assembly.
Page 2 Instructions d’installation pour la pose de la poignée du couvercle du filtre ClearWater II et l’enlèvement de l’assemblage du couvercle 519-7601 819-9002 (2) Avec un tournevis Phillips, visser les deux vis Phillips fournies à travers la Pour enlever le couvercle : poignée dans le couvercle du filtre tel que montré...