Table Des Matières; Before Starting The Appliance - Nordcap KU 407-G Série Mode D'emploi

GB
Contents
Get to know ............................................2
Warning ..................................................3
Before starting the appliance .................. 4
Maintenance ........................................... 4
Has the appliance stopped working?...... 5
Technical data......................................... 5
Installation ..............................................5
Control panel .......................................... 6
Reversing the door ................................. 7
Replacing the lamp strip. ........................ 9
Ajustment of the door ............................. 9
Mounting of lock. .................................... 9
Warranty, spare parts ........................... 10
Disposal ................................................ 11
Before starting the
appliance
Check that the cabinet is undamaged.
Please report any damage immediately to
your dealer. Wash the cabinet and inner
lining with a mild unscented detergent and
wipe it dry. Do not use abrasive scouring
powder, steel wool or similar.
Maintenance
Switch off the appliance and pull out the
plug when cleaning the cabinet.
Only use an unscented detergent when
clea ning the cabinet inside.
You may remove the top panel and wash it
when cleaning the cabinet inside.
The kick panel can be removed to faciliate a
vacuum-cleaning of the floor.
To make the cooling system work at its
optimum it is necessary from time to time
to clean the wire condensator and the com-
pressor at the back of the cabinet by means
of a brush or a vacuum cleaner. Remember
to clean the drain.
4