Neopost AS-930 Guide Utilisateur page 26

8: Status
9: Ink level cartridge
Pos: 43 /Bedienungsanleitungen/Geräte spezifisch/Drucker/4.4.3_Additional Display Texts_HINWEIS_Table Top @ 2\mod_1275402350991_18861.doc @ 20371 @
26
Please refer to the section "Menu" of this manual, to
get more detailed information about print direction.
This setting can be locked, so that a print direction
setting, send from the PC is ignored. To lock this
setting, select this line and press the Ok
four seconds. A
direction setting, showing that it is locked now.
To unlock the setting select this line again and press
the Ok key for four seconds. The
disappears again.
This line shows the printer status and the used
interface.
OnlinUSB The printer is ready to receive print data
from the PC via the USB interface. No changes to
printer settings via a printer menu can be made when
the printer is Online.
OnlinTCP The printer is ready to receive print data
from the PC via the Ethernet interface. No changes to
printer settings via a printer menu can be made when
the printer is Online.
Offline The printer menus can be accessed and
changes to settings can be made when the printer is
Offline.
Changing from OnlinUSB or OnlinTCP to Offline: Hit
the Cancel key.
Changing from Offline to Online: Select this line
(line 8) in the main menu (see Figure 5 above) by
hitting the Cancel
key and then hit the Ok
The height of the bars, shows the amount of ink left
per cartridge.
To see the exact percentage of ink left, select one of
the bars with the arrow left
change the amount of ink left in the cartridge, change
the value with the arrow up
You can access the cartridge menu by selecting one of
the bars with the arrow left
key. In this menu you can reset the amount of ink
to 100% or change the ink type.
symbol appears next to the
key or using the arrow down
key.
key. To manually
or arrow down
key and hitting the Ok
Guide utilisateur Version 3.1
key for
symbol
keys.