Hiland HLDS01-CGTHG Guide D'utilisation page 9

ASSEMBLY INSTRUCTIONS
7. Carefully install the glass tube (G) between
the center of top plate (D) and control box
assembly (J). Make sure the end of the glass
tube (G) is inserted securely into the three
clips of the control box assembly (J).
8. Assembly the glass tube fixer (C).
Insert the ceramic fiber (Q) to the quarzt tube
fixer. Press the glass tube fixer to the glass tube.
Make sure the ceramic fiber is outside of glass
tube.
Use Phillips screwdriver (LL) to secure
the glass tube fixer (C) to the top plate (D)
with M5 x 12 mm screws (DD).
Hardware Used
DD
M5 x 12 mm Screw
Phillips
LL
Screwdriver
7
To aid in installation
place black silicone
ring on the middle
plate and then
install glass tube.
Ensure the rim of
the glass tube sits
firmly in the black
silicone ring.
8
x 3
x 1
9
D
G
J
BLACK
SILICONE
RING
C
DD
Q