SilverCrest SBD 60 A1 Instructions D'utilisation Et Consignes De Sécurité page 27

Fixing the tap unit
[ 1 ]
(Fig . G):
– Press and hold the lock buttons
tap unit .
[ 1 ]
– Align the tap unit
faucet . If aligned correctly, the handle on
the keg adapter
17 ] [
unit .
[ 1 ]
– Press down the tap unit
locks in place in the keg handle
– Release the lock buttons
unit .
[ 1 ]
Place the cover
16 ] [
container (Fig . H) .
[ 13 ]
˜ Operation
Connect a beer keg
beer keg") .
Switch the product on (see "Connecting and
switching the product on/off") .
Place a glass under the tap unit
of approximately 45° .
Opening the tap: Pull the handle on the tap
unit by about 90° with a swift motion
1 ] [
(Fig . I) .
Closing the tap: Release the handle on the tap
unit . The handle automatically snaps back
[ 1 ]
into the original position .
Replacing a beer keg
– Switch the product off (see "Switching the
product on/off") .
– Disconnect the product from the power
supply .
– Remove the cover
– Press and hold the lock buttons
tap unit . Remove the tap unit from the
[ 1 ]
cooling container
– Remove the extension pipe
disposable faucet .
on the beer keg
[ 22 ]
on the
1a ] [
with the disposable
[ 1 ]
extends through the tap
until the tap unit
1 ] [
.
[ 23 ]
on the tap
[ 1a ]
on the cooling
(see "Connecting a
22 ] [
at an angle
1 ] [
:
[ 22 ]
.
[ 16 ]
on the
1a ] [
.
[ 13 ]
from the
[ 2 ]
– Remove the beer keg
container .
13 ] [
– Assemble a new disposable faucet with the
keg adapter
[ 17 ]
the new beer keg
disposable faucet") .
– Connect the new beer keg
(see "Connecting a beer keg") .
Do not leave an uncooled, open beer keg
in the product after use .
˜ Cleaning and care
m WARNING! Risk of electric shock!
Before cleaning, switch the product off
(see "Switching the product on/off") and
disconnect the product from the power supply .
m ATTENTION! Risk of product damage!
Do not pour water or any other liquid into the
cooling container
13 ] [
Do not clean any parts of the product in the
dishwasher .
Do not immerse the product in water or other
liquids .
Do not use chemical, alkaline, abrasive or
other aggressive detergents or disinfectants to
clean this product as they might be harmful to
its surfaces .
Clean regularly surfaces that can come in
contact with food and accessible drainage
systems .
from the cooling
22 ] [
and keg connector from
18 ] [
(see "Assembling the
22 ] [
to the product
22 ] [
.
GB/IE
22 ] [
25