Publicité
Les langues disponibles
Les langues disponibles
If one of the supply cords is
damaged, it must be replaced
by a special cord or assembly
available from the manufacturer
or its service agent .
Do not connect or disconnect a
supply cord with wet hands .
Do not store explosive
substances such as aerosol cans
with a flammable propellant in
this product .
Pay attention to the warnings
on the beer keg, for instance
concerning maximum
temperature and pressure .
22 GB/IE
˜ Preparation
m
ATTENTION! Risk of product damage!
Always hold the product by the bottom edge
when lifting .
Do not expose the product to direct sunlight .
To ensure proper ventilation, position the
product in such a way that at least 15 cm
distance to the next object are kept on all
sides .
Do not expose the product to wind, water
spray, and dripping water .
Do not cover the product during operation .
NOTES:
The product is designed to keep cool beer
cool . You can also use the product to cool
warm beer down .
Cooling takes a long time . At an ambient
temperature of 25 ºC, the product may
need up to 48 hours to chill the beer to a
temperature between 3 to 6 ºC .
For faster cooling: Buy pre-chilled beer or chill
the beer in the refrigerator over night before
intended use .
Cool the beer sufficiently before pouring a
beer . Insufficiently chilled beer produces too
much foam .
Keeping the cover
16 ]
[
of time can cause a significant increase of the
temperature in the cooling container
Clean the product (see "Cleaning and care") .
Place the product on a stable and level
surface .
Connecting the removable drip tray
the grille in the drip tray . Push the drip tray over
the drip tray connectors
open for long periods
.
13 ]
[
: Place
3 ]
[
(Fig . C) .
12 ]
[
Publicité
