Handling; Options; Brakes - Quickie Shark RS Notice D'utilisation

3.0 Handling

delivery
Your new Shark RS / RT is delivered fully assembled
in a cardboard box. In order to avoid any damage
during transportation, loose or
parts to be fitted, such as the rear wheels are
packed separately in the cardboard box.
unpacking:
• Check the shipping cardboard box for external damage
which may have been caused during transportation.
• Remove all packaging material.
• Take all bike parts (including wheels) carefully out of the
box and check that they are complete.
• Check all parts for surface damage, scratches, cracks,
dents, distortions and other
defects.
• Should you find any damage, or if any parts are missing
please let us know immediately.
Transporting the shark Rs / RT:
To keep the Shark RS / RT as compact as possible,
the rear wheels are removed before delivery and packed
separately in the box.
The wheels are mounted to the rear axle by simply push-
ing them on or by screwing them on, depending on your
choice of axles.
CauTION!
before each use, you must check that the screw and
plug connections are secure!

4.0 Options

brake

brakes

The bike has two brakes which work independ-
ently from one another.
Parking brake (Fig. 4.1 + 4.2)
The parking brakes, mounted on the fork serve
as wheel locks. They can also be applied with
the aid of a locking lever. The locking lever must
be locked into place for these to work prop-
erly. The bike should not roll when the parking
brakes are applied. This is the only way to guar-
antee safe transfer to and from the bike.
Main brakes (Fig. 4.3)
The brakes allow you to safely and comfortably
brake your hand bike.
CauTION
If the main brakes should fail, then the parking
brakes may be used once for emergency braking.
after that, the main brakes must be repaired.
8
SHARK RS / RT
Fig. 4.1
Fig. 4.2
Fig. 4.3