1. Hold down the water storage tank and remove as shown below (dismantle the water storage tank as shown below)
2. Open the PVC cover of the water storage tank and fill the tank with water, which should be pure water as it contains less minerals.
(Do not fill the water tank with lotion, cosmetics, incense oil, solids and other items that will cause damage to the product)
3. (The water tank and water bottle must be filled with water as shown below) Reassemble the water tank
Check the direction of the tank and push the tank horizontally into the card slot of the tank until you hear a clicking sound. Make sure that the water tank is correctly
mounted without being loose.
(Make sure the card slot of the water tank is dry without water. Make sure the tank is dry without water when putting it
back in the device (the figure below compares the device with a dry tank and the device with a wet tank)
C
D1
Important notice: Every time after filling and before use, keep the straightener folded until steam comes out of the steam valve. This will take approximately 10 seconds.