Asus -Google Meet hardware kit GQE15A Manuel De L'utilisateur page 53

Care during use
• Do not walk on the power cord or allow anything to rest on it.
• Do not spill water or any other liquids on your system.
• When the system is turned off, a small amount of electrical current still
flows. Always unplug the power cord from the power outlets before
cleaning the system.
• If you encounter the following technical problems with the product, unplug
the power cord and contact a qualified service technician or your retailer.
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not function properly even if you follow the operating
instructions.
– The system was dropped or the cabinet is damaged.
– The system performance changes.
• Avoid contact with hot components inside the Meet Compute System.
During operation, some components become hot enough to burn the skin.
Before you open the computer cover, turn off the computer, disconnect the
power, and wait approximately 30 minutes for the components to cool.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of flammable
liquid or gas;
• A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
53