Asus -Google Meet hardware kit GQE15A Manuel De L'utilisateur page 31

For Standard definition (SD) video quality
• Latency should be less than 100 ms when pinging Google's public
DNS server at 8.8.8.8.
• Outbound signals from a participant in all situations must meet a 1
Mbps bandwidth requirement.
• Inbound signals depend on the number of participants:
- 1 Mbps with 2 participants
- 1.5 Mbps with 5 participants
- 2 Mbps with 10 participants
Space requirements
• For the Meet Compute System device, you must have a 40 mm x 250
mm x 180 mm / 1.57 in. x 9.84 in. x 7.08 in. space available to mount
the device or place it on a table.
• For the speakermic, you must have at least a 55 mm x 140 mm x 150
mm / 2.17 in. x 5.51 in. x 5.91 in. (H x W x L) space available to place
the unit on the table or mount it on the wall.
• For the touchscreen control panel, you must have a 250 mm x 200
mm x 300 mm / 9.84 in. x 7.87 in. x 11.81 in. (H x W x L) space available
to place it on a table
• The universal hook mount on the camera fits the width on most
standard monitors.
Display requirements and placement
Your Meet Compute System work with LCD, LED, plasma, and projector-type
monitors and televisions. The display must have an HDMI™ or DisplayPort
input.
You can place the display on a table against one wall, or mount the display
on a wall or ceiling for a projector unit. Note that if you mount the display,
you may need to drill holes and conceal cables. If you have an existing video
conferencing system in the room, you may be able to repurpose the existing
setup for your Meet Compute System.
31