Nikon EDG Serie Manuel D'utilisation page 43

Shooting
Compatible digital cameras:
Shooting modes:
Exposure metering:
Focus:
Zoom:
Shutter release:
Fixing to a tripod:
D3 series, D2 series, D5000, D700, D300, D100, D90, D80, D70 series, D60, D50, D40 series (as of May
2009)
・ When using a Nikon FX-format camera, vignetting occurs with focal length display between
500mm and 750mm.
A (Aperture-Priority Auto) mode or M (Manual) mode
・ Appropriate aperture using aperture-priority auto mode with film camera has not
been verified.
Center-weighted metering
・ Matrix metering and spot metering cannot be used.
・ When you move away from the finder during the shooting, prevent light entering with a shield
such as an eyepiece cap.
・ Because the optical system has different characteristics from ordinary interchangeable
lenses, when the FSA-L2 and a Fieldscope are used for shooting with a digital SLR camera,
exposure may vary with the camera model. Use exposure compensation if necessary.
Exposure compensation may be necessary when used at wide setting.
・ Aperture and focal length vary depending on the actual zoom setting, however, the aperture
and focal length of the camera itself are indicated at 13 and 800.
Manual focus using the focusing ring on the Fieldscope body.
・ "Autofocus" and "Manual focus with electronic rangefinder" function cannot be used.
・ When a lens is used at a telephoto setting, the viewfinder image becomes darker because of
the changes in F-number. Please take into consideration that in this situation it may be
difficult to focus.
Operate using the zoom ring. Rotate clockwise for telephoto side setting, and rotate counterclockwise
for wide setting.
To reduce vibration caused by shutter release, please use the following mode/items:
Exposure delay mode, remote cord, self-timer, remote control, Modulite Remote Control Set ML-3, etc.
・ When using a tripod, please use a sturdy and stable model.
It is important to take the anterior/posterior balance into consideration when attaching a tripod.
・ Keep a well-balanced position by using the three tripod screw sockets located on the EDG
Fieldscope body.
Jp
En
De
Fr
Es
It
Ru
43