IKEA TRADFRI Mode D'emploi page 6

ENGLISH
ADD LIGHT SOURCES TO YOUR
STEERING DEVICE:
Before you can use your light source
you'll need to pair it with a steering
device.
To add more light sources, just repeat
the steps below:
1. Make sure that your light source is
installed and the main power switch
is turned on.
2. Hold the steering device close to
the light source you want to add (no
more than 5 cm away).
3. Press and hold the pairing button
for at least 10 seconds. A red light
will shine steadily on the steering
device. Your light source will begin
to dim and finally flash one time to
indicate that it has been successfully
paired.
6