Sauder 411197 Instructions De Montage page 9

Step 5
Turn four BLACK 9/16" FLAT HEAD SCREWS (32S) into
å
the ENDS (A2 and B2) until the shoulders of the SCREWS
rest on the surfaces of the ENDS.
Slide the END MOLDINGS (M73) onto the ENDS (A2
å
and B2). Line up the grooves in the MOLDINGS over the
heads of the SCREWS in the ENDS.
These edges
should be even.
www.sauder.com/services
A2
M73
BLACK 9/16" FLAT HEAD SCREW
(4 used in this step)
B2
Shoulder
32S
411197
These edges
should be even.
M73
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
Page 9