Samsung HW-H430 Manuel D'utilisation page 15

To connect the Soundbar to a Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
1. Press the ( ) button on the main unit's side panel or Press the
control to select the BT mode.
• You will see BT READY on the front display of the Soundbar.
2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth
device's user manual.)
3. Select the Stereo headset menu on the Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] Soundbar" from the list.
• When the Soundbar is connected to the Bluetooth device, it will display Device Name ➡ BT on the front
display.
• If the Bluetooth device has failed to pair with the Soundbar, delete the previous "[Samsung] Soundbar"
found by the Bluetooth device and have it search for the Soundbar again.
5. Play music on the connected device.
• You can listen to the music playing on the connected Bluetooth device over the Soundbar system.
• In BT mode, the Play/Pause/Next/Prev functions are not available, However, these function are available in
Bluetooth devices support AVRCP.
▪
If asked for PIN code when connecting a Bluetooth device, enter <0000>.
▪
Only one Bluetooth device can be paired at a time.
▪
The Bluetooth connection will be terminated when you turn the Soundbar off.
▪
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
-
If there is a strong electrical field around the Soundbar.
-
If several Bluetooth devices are simultaneously paired with the Soundbar.
-
If the Bluetooth device is turned off, not in place, or malfunctions.
-
Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas
stoves use the same frequency range as the Bluetooth device, which can cause electric
interference.
▪
The Soundbar supports SBC data (44.1kHz, 48kHz).
▪
Connect only to a Bluetooth device that supports the A2DP (AV) function.
▪
You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)
function.
Once paired the device,on D.IN/AUX/USB mode, select "[Samsung] Soundbar" from the list will
▪
automatically change to BT mode.
Connect
Bluetooth device
(SOURCE) button on the remote
15