Safety Instructions; Operation; Product Description - Kärcher CR 5.220 Manuel D'instructions

Safety instructions

CAUTION
The non-compliance with safety instruc-
tions may lead to damages of the product
and to dangers for the operator and other
persons.
 To avoid risks, all repairs and replace-
ment of spare parts may only be carried
out by the authorised customer service
personnel.
 This product is not intended for use by
persons (including children) with limited
physical, sensoric or mental capacities
or lack of experience and/or skills, un-
less such persons are accompanied
and supervised by a person in charge of
their safety or if they received precise
instructions on the use of this product.
Children should be supervised to pre-
vent them from playing with the product.

Operation

Product description

1 Tap connection with reduction fitting
2 Fastening material
3 Carrying handle
4 Stopper / retract
5 Hose coupling
6 Spray nozzle
7 Handle
8 Wall mount
9 Connection hose
10 Padlock (not included in the delivery)
Preparing the Appliance
Illustration
 Mark the bores to mount the wall mount
and place dowels into the drilled bores.
 Fasten the wall mount using the includ-
ed washers and screws.
CAUTION
Risk of damage! Check the load-bearing
capacity of the wall prior to installation.
Illustration
 Insert the metal bar of the hose box into
the wall bracket from the top.
Illustration
 The product can be protected against
theft. For this purpose, attach a padlock
to the metal bar (drilled hole) under-
neath the wall bracket of the hose box
Illustration
 Loosen both screws on the stopper.
 Move the stopper to the desired posi-
tion and retighten it.
CAUTION
Risk of crushing! Do not reach into the hose
outlet while the hose is being pulled out or
coiled up.
NOTICE
Make sure the hose has a free backflow. It
must not be too dirty prior to being coiled up
to ensure the proper function of the auto-
matic coiling.
 Connect the connecting hose to the wa-
ter tap.
 Open tap.
Unroll the hose
 Pull the hose out to the desired length.
The hose can be locked in regular inter-
vals. The lock becomes noticeable due
to a click.
 Attach the Kärcher garden accessories
to the hose coupling.
Coil the hose
 Trigger the automatic coiling function by
briefly and gently pulling the hose.
 The garden hose is coiled up evenly.
Finish operation
 Turn off tap.
– 2
EN
Operation
9