MAINTENANCE
Empty dust cup after each use
Empty
Release
Brushroll Maintenance
Turn locks on bottom of floor nozzle
counterclockwise to remove the brushroll
cover. Run scissors along the guide on the
brushroll to remove any string, hair, or debris.
To close, replace the cover and turn locks
counterclockwise.
For questions or to register your product, contact us at
800-798-7398 or visit us online at sharkclean.com
@sharkcleaning
©2017 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC.
DUOCLEAN is a trademark of SharkNinja Operating LLC.
NV200C_QSG_EN_170807
Filter Maintenance
Wash filters to keep the
suction strong.
Rinse filters and allow to air-dry
completely. Tap loose dirt
from foam filters as needed
between washes.
See enclosed Owner's Guide
for complete details on
removing and cleaning filters.
Soft Roller Maintenance
Remove the Soft Roller by sliding up the
button on the front of the floor nozzle.
Clear away any debris, then reinstall the
Soft Roller, sliding it in until it clicks
into place.
Please be sure to read the enclosed Shark® Owner's Guide prior to using your unit.
UPRIGHT
SLIM
QUICK
START
GUIDE
Use this Quick Start Guide
to learn about your new
vacuum's great features.
NV200C