Maintenance; Light Replacement - Progress PDP9030E Notice D'utilisation

36
progress

MAINTENANCE

Grease filters
CLEANING METAL CASSETTE GREASE
FILTERS
• The filters must be cleaned every 2 months,
or more frequently in case of particularly heavy
use of the hood. Filters can be washed in a
dishwasher.
• Pull out the sliding suction panel.
• Remove the filters one by one, after having
disconnected the relative fastening elements.
• Wash the filters, taking care not to bend
them. Let them get dry before refitting them.
(The colour of the filter surface may change
throughout the time but this has no influence
to the filter efficiency).
• When refitting the filters, make sure that the
handle is visible on the outside.
• Close the sliding suction panel.
Charcoal filter (Recycling version)
REPLACING CHARCOAL FILTERS
Warning: Turn the lights off and wait until the
lamps cool down before you change the odour
filter.
• These filters are not washable and cannot be
regenerated, and must be replaced approxi-
mately every four months or more frequently
by particularly heavy use.
• Pull out the sliding suction panel.
• Remove the grease filters.
• Remove the saturated carbon filter by releasing
the fixing hooks
• Fit the new filter by hooking it into its seat-
ing.
• Replace the grease filters.
• Close the sliding suction panel.
Lighting

LIGHT REPLACEMENT

(28-40 W) incandescent light.
• Remove the metal terminals fixing the light
cover.
• Slide the light cover to the right until the left
hand is free. Lower it slightly and slide it to
the left to free it completely.
• Unscrew the bulbs and replace them with new
ones having the same characteristics.
• Replace the lighting support in reverse or-
der.