Tableau 28. Configuration 5 : Client WLAN supplémentaire comme basculement de liaison montante
Fonction
Port
1
3
5
8
7
9
Configuration 6 (configuration personnalisée)
Tableau 29. Configuration 6 - configuration personnalisée
# Disable DHCP server on Down Link ports
sudo uci set dhcp.lan.dhcpv4=disabled
sudo uci commit dhcp
sudo /etc/init.d/dnsmasq restart
# Includes physical ports into Down link
# Refer to Wired/wireless table in the manual for the detailed interface name
sudo uci set network.edge_lan.ifname='eth1 eth3 eth6'
sudo uci commit network.edge_lan
sudo /etc/init.d/network restart
# Configure static IP of Down link ports
sudo uci set network.edge_lan.proto=static
sudo uci set network.edge_lan.ipaddr=192.168.70.254
sudo uci set network.edge_lan.netmask=255.255.255.0
sudo uci commit network.edge_lan
sudo /etc/init.d/network restart
# Save the change into custom preset
sudo save_topology_config
# Change to custom preset (Or go to XCC web,"Edge Networking", select "custom configuration")
sudo set_topology 6
Remarque :
98
2
4
6