Ega Master 51251 Manuel D'instructions page 45

AT DCV/ACV RANGE
Range
10Hz~100kHz
Remark:
• Input amplitude: ≥ 600mV rms
INSULATION SPECIFICATIONS
Testing Voltages
50V
(0% to 10%)
100V
(0% to 10%)
100V
(0% to 10%)
500V
(0% to 20%)
1000V
(0% to 20%)
Remark:
• Short-Circuit Test Current less than 2.0mA.
IMPORTANT!
The maker will not take responsibility for damage or malfunction as a result of the device being
incorrectly used or, applied for a purpose for whith it was not intended.
According to Waste Electrical and Electronic Equipment directive (WEEE), these ones
must be collected and arranged separately. If you have to throw them out, please, do not use the
usual rubbish. Please, contact your distributor for free recycling.
The maker guarantees to the device owner 12 months against any manufacture defect.
This guarantee do not cover the parts wich are consumables.
Note: to apply the guarantee its necesary to send the "GUARANTEE CERTIFICATE" duly
filled within one week after purchased the machine to the maker.
Measurement
Range
0.1MΩ~50.0MΩ
0.1~100.0MΩ
0.2MΩ~99.9MΩ
100MΩ~250MΩ
0.5MΩ~99.9MΩ
100MΩ~500MΩ
4.0MΩ~99.9MΩ
100MΩ~999MΩ
1.00GΩ~2.00GΩ
GUARANTEE
Accuracy
± (0.1%+3)
Resolution
0.1MΩ
0.1MΩ
0.1MΩ
1MΩ
0.1MΩ
1MΩ
0.1MΩ
1MΩ
10MΩ
NOTES
Input Protection
600Vp
Accuracy
± (3%+5)
± (5%+5)
45