Replacing The Batteries; Replacing The Fuse - Ega Master 51251 Manuel D'instructions

Cleaning
• Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or
solvents. Dirt or moisture in the terminals can affect readings.
• Turn the Meter off when it is not in use.
• Do not use or store the Meter in a place of humidity, high temperature, explosive, inflammable
and strong magnetic field.
• The internal circuit of the Meter shall not be altered at will to avoid damage of the Meter and any
accident.
Replace the batteries as shown in Figure 16. Follow the steps below to replace the batteries.
Warning
To avoid shock, injury, or damage to the Meter:
• To avoid false readings, which could lead to possible electric shock or personal injury, replace
the batteries as soon as the battery indicator
• Turn the Meter off and remove the testing leads from the terminals.
1. Remove the two screws from the battery door by using a standard screwdriver.
2. Open the battery door.
3. Remove and replace the batteries.
6pcs of AA (AM3/LR6), standard capacity around 2450mAh.
4. Rejoin the case bottom and battery compartment, and reinstall the screw.
Replace the fuse as shown in Figure 16. Follow the steps below to replace the batteries.
Warning
To avoid shock, injury, or damage to the Meter:
• Use ONLY fuses with the amperage and voltage specified.
• Turn the Meter off and remove the testing leads from the terminals.
1. Remove the two screws from the battery door, two screws from the case bottom, one screw at
the back of the battery.
2. Open the battery door and the case bottom

REPLACING THE BATTERIES

Figure 16. Replacing the Fuse and the Battery

REPLACING THE FUSE

appears.
41