Publicité
Step 11
Completely push three MAGNETIC CATCHES (3I)
å
into the holes in the TOP (C) exactly as shown.
Carefully stand your unit upright.
å
Fasten the TOP (C) to the ENDS (A and B),
å
BACKS (F and G) and UPRIGHT (K). Tighten
twelve TWIST-LOCK® FASTENERS.
B
K
www.litterbox.com/support
3I
C
F
G
425539
C
How to use the SAUDER TWIST-LOCK® FASTENER
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
A
Dowel end
Page 15
Publicité
