Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
REPLACING THE SWIVEL SEAL
1.
Turn off and disconnect the air supply line from swivel body.
2.
Remove the swivel assembly from reel axle.
3.
Remove the circlip from the swivel and separate the swivel from the hose
reel
4.
Replace the seals and reassemble the swivel.
5.
Use sealant tape on swivel thread fitting, then reconnect the swivel
thread fitting with the axle.
6.
Re-connect the inlet supply line.
CLEANING
Clean the hose with a cloth dipped in warm water to remove dirt or deposits
and ensure correct rewinding. Do not use detergents or solvents that could
damage the air hose or reel mechanism.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
Page 7
HAND-CRANK SWIVEL AIR HOSE REEL
www.princessauto.com / 1-800-665-8685
8880965
Publicité
Table des Matières
