V1.0
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2.
Do not use the tool if any parts are damage broken or misplaced. Repair or
replace the parts.
3.
Ensure that reel is properly installed before connecting input and output
hoses.
4.
Before connecting reel to supply line ensure that pressure does not
exceed maximum working pressure rating of the reel.
5.
Remove system pressure immediately if a leak occurs in the hose or reel,
or if the reel ceases to wind and unwind.
6.
Do not abruptly jerk on the hose as this can damage the hose.
7.
Inspect the tool's air hose for cracks, fraying or other faults before each
use. Discontinue use if the air hose is damaged or hissing is heard from
the air hose or couplers. Replace the defective air hose.
8.
Do not allow people, mobile equipment or vehicles to pass over the
unprotected air hose. Position the air hose away from high traffic areas, in
a reinforced conduit or place planks on both sides of the air hose to create
a protective trench.
9.
Prevent damage to the air hose by observing the following:
a.
Never carry the tool by the air hose.
b.
Keep the air hose away from heat, oil, sharp edges or moving parts.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Contents:
• Air Hose Reel
• Air Hose
Page 5
HAND-CRANK SWIVEL AIR HOSE REEL
• (2) 3/8 to 1/4 in. Reducer Adapters
www.princessauto.com / 1-800-665-8685
8880965