Kind Reminder; Function Description; Uk User Manual - SBS TTMONOSPEAKERBTK Mode D'emploi

UK
USER'S GUIDE
Please store and use this product at normal temperature;
DO NOT expose this product to rain or damp;
DO NOT toss this product and prevent it from falling and being damaged;
DO NOT disassemble, repair and modify this product;
As it has an inbuilt with lithium battery, DO NOT cast or place it in fire to avoid danger!

KIND REMINDER

1. To prolong the speaker's life and for your physical and mental health, please don't listen
to music at big volume for a long time to avoid hearing damage.
2. When something wrong happen with the speaker, please immediately shut off the power
switch, plug off the USB, to prevent speaker or other parts damaged.
3. Power shortage will affect Bluetooth distance or Bluetooth disconnection, please charge
in time.
OVERVIEW
1. Click "pause" during playing and click "play" when it is paused.
Click to answer the phone when there is a Bluetooth call, click it again to hang up and keep
it pressing to refuse the call. Keep 3 seconds to disconnect the Bluetooth device.
2." " down selection key. Long press to select the volume down. Short press to previous
song.
3." " up selection key. Long press to select the volume up. Short press to next song.
SPECIFICATION:
Model: Wild Portable Speaker
Bluetooth specification: Bluetooth V2.1
Transmission distance: 10M
(It may vary when the environmental factors and the connected Bluetooth devices are
different)
USB charging voltage: DC 5V/500mA
Built-in battery: Lithium battery, 300mAh
Output power: 3W
Frequency response: 90Hz-20KHz
Sensitivity: 80db±2db
S/N ratio: ≥ 76dB

FUNCTION DESCRIPTION

BLUETOOTH OPERATION
1. Turn on the speaker. The green indicator light will flash to detect Bluetooth enabled
devices near you. The green indicator light will go out if no Bluetooth device is detected
within 5 minutes.
2. Pair the speaker with the desired Bluetooth device.
3. Play/pause as desired by pressing .
4. Long press about 2.5S . to change the mode from Bluetooth to AUX.
AUX PLAYBACK OPERATION
1. Turn on the speaker.
2. Insert an 3.5mm audio cable into the aux jack on the back of the speaker, connecting to
any audio device such as mobile phones or computers with the other port.
3. press to enter mute mode and re-press to release sound.
CHARGING THE SPEAKER
The speaker has a built-in Lithium battery. The battery is rechargeable and provides
approx 5 hours continuous operation when fully charged.
Use the micro-USB cable to charge the speaker. The red indicator light will illuminate. The
red indicator light will go out when the speaker is fully charged.
4