Using Your Barbecue - TOLE K60 Mode D'emploi

2. USING YOUR BARBECUE

A. Attaching and assembling your barbecue
Your TOLE K60 barbecue includes heavy parts.
The attachment and assembly of the barbecue therefore requires 4 adults to perform the
necessary manoeuvres.
1. TOLE K60 barbecue component parts
A. Storage tray
B. Casing
C. Grill support backing
D. Left grill support
E. Right grill support
F. Front plate
G. Upper plate
H. Grates
I. Hood
J. Cooking plate
K. Removable handles
2. Attaching and assembling your barbecue
WARNING! To avoid accidents, your barbecue must be attached to a stable horizontal support prior to use!
You may need to prepare the ground before attaching the barbecue using the pegs provided.
It should be attached to uncracked concrete only. The concrete slab should have the following minimum dimensions: L=80 cm; w=60 cm;
thickness=15 cm. We recommend that you place the barbecue at least 10 cm from your patio.
Adequate floor protection is required to protect the floor covering from traces of rust caused by natural erosion of the Corten steel in several of the
barbecue parts.
Drill 4 holes with a diameter of 10 mm as
shown on the diagram. The depth should
be at least 110 mm.
32
Position the storage tray above the holes. Hammer the pegs into the holes. Tighten
the pegs in using a spanner.
www.tole.be