Publicité
Les langues disponibles
Les langues disponibles
How you press start/stop button
Press start/stop button for 1 second
Press start/stop button briefly
Press start/stop button for 3 seconds
Press start/stop button for 10 seconds
Press start/stop button for 20 seconds
Operating the docking station
User interface signals and their meaning
1 sec.
1 x
10 sec.
3 sec.
20 sec.
How robot responds
Robot switches from sleep mode to standby
Robot starts or stops cleaning
Switches robot on or off.
Activates WiFi setup and user interface on robot.
Resets WiFi connection. You hear two long beeps.
Activates WiFi setup and user interface.
The docking station has two controls that can be used to operate the robot.
Battery full and go button
If you press the battery full and go button on the docking station while the
robot is charging, the robot starts cleaning as soon as the rechargeable
battery is full.
24h button
If you press the 24h button on the docking station, the docking station starts
to count down the 24 hours until the next cleaning run. When the
countdown is finished, the robot starts cleaning until its battery runs low and
then returns to the docking station automatically to recharge.
Note: If you activated the 24h scheduler in the app, please do not use the
24h button on the docking station to activate the 24-hour countdown to the
next cleaning run.
The robot has a display with two indicators: a warning indicator and the WiFi
connection indicator. The start/stop button gives light signals. The table
below explains the meaning of the signals.
English
13
Publicité
