VALBERG WF 812 B W701T Consignes D'utilisation page 35

C
• Unscrew the water inlet hose(s) from the Washing Machine.
• To remove the water inlet filter from the water inlet valve, use a pair of longnosed pliers
to gently pull on the plastic bar in the filter.
• A second water inlet filter is located in the tap end of the water inlet hose. To remove
the second water inlet filter, use a pair of long-nosed pliers to gently pull on the plastic
bar in the filter.
• Clean the filter thoroughly with a soft brush and wash with soapy water and rinse
thoroughly. Re-insert the filter by gently pushing it back into place.
CAUTION
The filters at the water inlet valve may become clogged
due to water quality or lack of required maintenance and
may break down. This may cause a water leak. Any such
breakdowns are out of the scope of the warranty.
Useful information
32 EN