Cramer 2101886 Mode D'emploi page 3

1 Description......................................... 4
1.1 Purpose.............................................................. 4
1.2 Overview........................................................... 4
1.3 Packing list........................................................ 4
2 Safety.................................................. 4
3 Installation......................................... 4
3.1 Unpack the machine.......................................... 4
3.2 Attach the guard.................................................4
3.3 Assemble the shaft.............................................5
3.4 Attach the auxiliary handle................................5
3.5 Install the battery pack.......................................5
3.6 Remove the battery pack................................... 5
4 Operation........................................... 5
4.1 Start the machine............................................... 5
4.2 Stop the machine............................................... 5
4.3 Operation tips.................................................... 5
4.4 Cutting tips........................................................ 5
4.5 Adjust the length of the cutting line.................. 6
English
4.6 Line cut-off blade.............................................. 6
4.7 Adjust the cutting diameter................................6
5 Maintenance.......................................6
5.1 General information...........................................6
5.2 Clean the machine............................................. 6
5.3 Install the cutting line........................................ 6
5.4 Replace the spool...............................................6
5.5 Replace the bump knob..................................... 7
5.6 Remove the trimmer head..................................7
5.7 Assemble the trimmer head............................... 7
5.8 Remove the brush-cutter blade.......................... 7
5.9 Assemble the brush cutter blade........................ 7
6 Transportation and storage.............. 7
6.1 Move the machine............................................. 7
6.2 Store the machine.............................................. 7
7 Troubleshooting................................. 8
8 Technical data.................................... 8
9 EC Declaration of conformity.......... 9
3
EN