Duux Whisper Mode D'emploi page 6

Masquer les pouces Voir aussi pour Whisper:
Table des Matières

Publicité

Instructions for use
Ventilation speed:
The Duux Whisper fan has 26 speed settings. When the LED display
shows '00', the device is switched off.
Horizontal oscillation: The fan swivels horizontally, 0 to 90 degrees, from left to right.
Vertical oscillation:
The fan swivels vertically, 0-100 degrees, from top to bottom.
The timer can be set to switch the fan off automatically. This can be set
Timer:
to between 0 and 12 hours from the time that the fan is first turned on.
The fan rotates at different speeds to simulate natural wind conditions.
Natural wind:
Night mode:
In night mode, the fan speed continues to operate at the set speed.
After 10 seconds, the LCD screen will completely turn off while
remaining to operate. To reactivate the LCD screen, simply press the
control ring.
Tip: When in night mode, press the control ring
twice to directly adjust the ventilation speed.
10
Operating instructions
1
Remove the parts from the packaging
and assemble the device according to the
instructions in this manual.
Connect the power cable to the input terminal
2
in the base of the product. Then insert the plug
into the wall socket. The control ring will light
up and show '00'.
Press the control ring once, to turn the product
3
on. The fan springs into life and will thereafter
default to the most recent speed setting.
Use the stainless steel exterior of the control
4
ring to switch between settings.
When a display icon is flashing, you can set and
5
Power
ventilation speed
Fan
down
Timer down
Timer
Horizontal oscillation
Swing
Natural wind
Comfort
Night
adjust this setting by pressing the control ring.
When the desired position is reached, press
the control ring again to confirm the selection.
When setting the fan speed and timer function,
6
the LED display will continue to flash until the
desired setting is selected. After this, press the
control ring again to confirm the selection.
Once the function is set, the icon will stop
7
blinking and will remain visible in the display,
for as long as this function is set to on.
Press the control ring for a few seconds to
8
switch off the appliance.
ventilation speed up
Timer up
Vertical oscillation
Night mode
11

Publicité

Table des Matières
loading

Table des Matières