should always be followed to reduce the risk of
fire,electric shock and personal injury.
# Guard against electic shock. Avoid body
contact with earthed or grounded surfaces.
# Store idle tool. When not in use the tools
should be stored in a dry, hight or locked up
place, out of reach of children.
# Do not force the tools. It will do the job better
safer at the rate for which it was intended.
# Cluttered areas and benches can cause
accident.
# Read the following safety instruction and
tool's labels before attempting to operate this
product. Be aware of tool's operation range and
limitations as well as its dangers.
#When not in use, power tools must be stored
in a dry place and locked up securely, out of
reach of children.
# Never allow the chain saw near your body or
your clothing when starting or using it.
# Do not switch your machine on when it is
upside down.
# When starting the chain saw ensure the chain
is not touching anything.
# Remember that the machine continues to run
for a short period after it is switched off.
# Beware of objects hurled by the line head.
# Do not use and do not start up and do not
use the chain saw near people, other animals
or obtrusive objects.
# During operation we recommend
10 m
keeping a minimum distance of 10
m between the machine and other
people.
# Always hold the device with both hands.
# Stand in a safe and steady position on both
legs.
# Never carry the chainsaw by the cable or
when it is connected to the mains or with your
fingers on the trigger.
# Avoid accidental starting. Ensure the
switch is in the off position before plugging
in.
Carrying power tools with your finger on the
switch or plugging in power tools that have the
switch on invites accidents.
# Keep the cable away from heat sources, oils
or sharp edges.
# When sawing, do not use chainsaw above
shoulder height.
# The operator is responsible for any accidents
or hazards that may occur to other persons or
their belongings.
# Do not operate a chain saw in a tree.
Operation of chain saw while up a tree may
resultin personal injury.
# Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be
caught in moving parts.
Wear clothing and safety gear suitable
for chain saw cutters operations.
We suggest wearing:
# safety helmet
# noise-damping earplugs
# protective goggles or visor
# protective gloves
# protective trousers
# sturdy shoes not sliding
Always use an extension cable with
high insulation characteristics and
which meets all current legislation
requirements.
# When operating a power tool outdoors,
use an extension cord suitable for outdoor
use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
# Before starting the motor, ensure that the
extension cable is clear of the cutting zone.
# Any damaged cable must be replaced
immediately by authorized staff.
# Remove the plug from the sacket before
27