Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
INSTALLATION INSTRUCTIONS
Four-Sided Square Trim 757STB
Used only with Valor 738, 739
37-1/2"
757 Square Trim
The 757 Four-Sided Square Trim is
intended to be used on any Valor G3
models 738 or 739 appliances fitted with
any inner front kit.
Installation of the Square Trim does not
affect clearances*, framing dimensions or
other specifications listed in the appliance
installation manual.
NOTE
* When measuring clearances, take
note that the mantel clearances
in the installation manuals are
referenced from the bottom of
the appliance,
NOT the bottom of
the trim!
See installation manual
supplied with the appliance.
4001901-08
© Copyright Miles Industries Ltd., 2022
G3 Series
4"
Overview
Bottom of
appliance
4"
757 Square Trim shown with optional
2"
744FVI FenderFire Single Door Front
(Other fronts are available)
738 or 739 heater
Publicité
Manuels Connexes pour Valor 757STB
Sommaire des Matières pour Valor 757STB
- Page 1 744FVI FenderFire Single Door Front 757 Square Trim (Other fronts are available) The 757 Four-Sided Square Trim is intended to be used on any Valor G3 models 738 or 739 appliances fitted with any inner front kit. Installation of the Square Trim does not...
- Page 2 Installation 1. Install 738 or 739 engine as per instructions supplied with engine. 2. Install 2 mounting brackets (supplied with heater) to the back of the square trim using the machine screws provided. 3. Fasten square trim assembly to heater using 4 screws.
- Page 3 GUIDE D’INSTALLATION Série G3 Bordure angulaire à 4 côtés 757STB Utilisez seulement avec les foyers Valor 738, 739 4” Bas de [102 mm] l’appareil 4” [102 mm] 37-1/2” [953 mm] Bordure angulaire 757 montrée avec 2” [51 mm] la Porte simple FenderFire optionnelle Bordure angulaire757 (D’autres devantures sont disponibles)
- Page 4 Installation 1. Installez le foyer 738 ou 739 selon le guide d’installation fourni avec le foyer. 2. Fixez les 2 supports de montage (fournis avec le foyer) à l’arrière de la bordure angulaire avec des vis à métaux fournis. 3. Fixez la bordure au foyer avec 4 vis fournies. 4.