GYS GYSDUST SELF EXTRACTOR Manuel D'utilisation page 13

Operating manual
PNEUMATICS
The inlet air system pressure must be less than or equal to 10 bar.
A higher pneumatic pressure than recommended can alter the operation of the product, with
a significant loss of suction. In this case, it is necessary to check the pressure at the pro-
duct inlet and on the suction system, located inside the product. (Setting 4 bars max).
A malfunction of the suction system can occur when the bag is full or completely blocked. In this case,
the full bag must be removed and replaced by a new one. For the bag, the manufacturer's recommen-
dations must be followed.
SANDING MACHINE
Direct mounting can be done on the sander.
A pneumatic sander (not included) with a Ø32 mm suction nozzle connects to the hoover. It can also be connected to
the pneumatic network via the automatic nozzle included in the suction hose.
Lever in position :
ON: Continuous operation of the hoover.
AUTO: Sander is on, hoover is on.
The sander is switched off, the hoover is switched off.
Note: When using a sanding block (not motorised), the automatic mode is not functional. In this
case, the selector switch must be used as a switch, the auto mode becomes the OFF function.
WARNING
The following indications:
1. Before use, read the instructions
2. Connect the hoover's metal ground clamp to a part of the workplace connected to the installation's ground circuit.
(The suction and circulation of dust generates static electricity).
3. Disconnect the pneumatic power supply before changing the bag.
The dust bag should avoid contact with flames or sparks.
FEATURES OF THE HOOVER
Mobile pneumatic hoover for explosive dusts deriving from sanding or similar operations, designed for connection to a
pneumatic tool.
Depression
Air flow
Air consumption
Adjustable inlet pressure
Suction cable length
Suction cable diameter
Dust bag capacity (included)
Dimensions
Weight
Translation of the original
instructions
An adaptable nozzle is supplied with the hoover.
Features
GYSDUST SELF EXTRACTOR
1 150 mm H2O
600 l/min
340 l/min
5 bar max
5 m
Ø 29 mm
7 kg
350 x 800 x 400 mm
21 kg
ATEX Standard
Group II
Category 3
13