Ega Master 56890 Manuel D'instructions page 36

7. Keep hands, loose clothing, long hair and jewelry away from working end of tool.
8. Power tools can vibrate in use. Vibration, repetitive motions or uncomfortable positions
may be harmful to your hands and arms. Stop using any tool if discomfort, tingling feeling or
pain occurs. Seek medical advice before resuming.
9. Keep body stand balanced and firm. Do not overreach when operating this tool.
Anticipate and be alert for sudden changes in motion, reaction torques, or forces during start up
and operation.
10. Do not use this tool when tired, under the influence of medication, drugs or alcohol.
11. Never use a damaged or malfunctioning tool or accessory.
12. Do not modify the tools, safety devices or accessories.
13. Do not use this tool for purposes other than those recommended
14. Never exceed rated pressure of tool.
IMPORTANT - READ CAREFULLY
This manual contains important information for the correct installation, operation and
maintenance of this equipment. All persons involved in the installation, operation and
maintenance of this equipment must be thoroughly familiar with the contents of this manual.
To safeguard against the possibility of personal injury or property damage, follow the
recommendations and instructions of this manual. Keep this manual for reference.
WARRANTY STATEMENT
The manufacturer products are warranted to be free of defects in materials and workmanship
under normal use for as long as the original purchaser owns them, subject to the guidelines
and limitations listed. This warranty does not cover: normal wear & tear, cosmetic items, abuse,
overloading, alterations, improper fluid, or use in a manner for which they are not intended. If
the customer believes a product is defective, the product must be delivered, or shipped freight
prepaid, to the nearest The manufacturer Author-ized Service Center for evaluation and repair.
This pump offers a 12 Month Warranty.
RECEIVING INSTRUCTIONS
Important! Make sure to inspect all of the components for shipping damage. If damage is
found, notify carrier at once. Shipping damage will not be covered by warranty. The carrier is
responsible for all loss associated with shipping damage.
SAFETY
Make sure to read the instructions, warnings and precautions carefully. Follow any
recommended safety precautions to avoid personal injury or damage to the unit. The
manufacturer cannot be responsible for any damage or injury from unsafe use, lack of
maintenance or incorrect operation. In the event any questions or concerns arise, contact The
manufacturer or a local representative for clarification.
The pump's maximum working pressure is 10,000 PSI(700kg/cm2). Make sure that all
hydraulic equipment such as rams, hoses, etc. used with this pump are rated at 10,000 PSI
(700kg/cm2) oper-ating pressure.
36
SAFE AND CORRECT USE