Sauder HomePlus Collection 411963 Mode D'emploi page 11

Step 7
Refer to the enlarged diagram to identify the parts on
å
the HINGES.
The DOORS may need some adjustments. Follow the
å
text below to make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), turn
å
the adjusting screw in or out.
To adjust the DOORS up and down (vertical), loosen
å
both vertical adjustment screws. Move the DOORS up
or down to the desired location. Tighten the screws after
making adjustments.
To adjust the DOORS in or out (depth), loosen the
å
mounting screw one turn and move the DOORS in
or out, as needed. Tighten the mounting screw after
making adjustments.
Adjusting screw (horizontal)
www.sauder.com/services
Mounting screw (depth)
(vertical adjustment)
411963 Page 11