Ecovery; Heat Recovery Core; Energy Recovery Core; Efrost Mode - Venmar AVS HRV CONSTRUCTO 2.0ES Mode D'emploi

Masquer les pouces Voir aussi pour HRV CONSTRUCTO 2.0ES:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. YOUR UNIT AND ITS PURPOSE (
1.3 R

ECOVERY

1.3.1 H
EAT RECOVERY CORE
Units with a heat recovery core (HRV Constructo 1.5ES and HRV Constructo 2.0ES units) are
designed specifically to control excess humidity and reduce ventilation costs by recovering the
heat energy from the exhausted air, and using that same heat energy to warm the fresh air being
supplied. This heat recovery process is accomplished in such a way that the stale air is never mixed
with the fresh air.
E
(
)
XAMPLE
IN WINTER
Stale air to outside
6°C/42°F
Fresh air from outside
0°C/32°F
1.3.2 E
NERGY RECOVERY CORE
The ERV Constructo 2.0ES unit is equipped with an energy recovery core (enthalpic core) that can
reduce ventilation costs in winter as well as in summer.
1.
During heating season, the unit draws humidity and heat from the stale air and transfers them,
in part, to the cold air entering the house, thus avoiding dryness problems and providing
maximum comfort (Example 1).
2. During cooling season, the unit reverses the process, preventing humidity from the outside air
from entering the house (Example 2).
E
1 (
)
XAMPLE
IN WINTER
Stale air
Fresh air
to outside
to building
4°C/40°F
18°C/64°F
VF0042
0°C/32°F
Fresh air
from outside.
1.4 D

EFROST MODE

When the outside temperature is below -5°C (23°F), recovery (of heat or energy) creates frost in the
module. To maintain its proper operation, the unit is programmed to defrost the recovery module.
The defrost frequency varies according to the outside temperature. Defrost lasts 7 minutes for HRV
Constructo 1.5ES, 6 minutes for HRV Constructo 2.0ES and 10 minutes for ERV Constructo 2.0ES
models (or 10 minutes for all models if set on "Extented Defrost"). During the defrost cycle, the unit
shifts to maximum speed and the dampers close.
After defrosting, the unit returns to the operating mode selected by the user.
All manuals and user guides at all-guides.com
VF0026
22°C/72°F
Stale air
from building
'
)
CONT
D
Fresh air to building
16°C/61°F
Stale air from building
22°C/72°F
E
2
XAMPLE
(
IN SUMMER WITH AIR CONDITIONING
Stale air
to outside
30°C/86°F
VF0043
32°C/90°F
Fresh air
from outside
5
)
Fresh air
to building
27°C/80°F
25°C/77°F
Stale air
from building

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hrv constructo 1.5esErv constructo 2.0es

Table des Matières