Important - Eads Telecom Connexity M720 Aide-Mémoire

Your M720
A new telephone set has just been installed for you.
Your M720 digital set gives you access to all the services and features available within the
M6500 IP PBX and
Your M720 digital set is a complete, high-performance tool, but is also simple and quick to
use, thanks to:
- a memory key (used to program a number or a function),
- a message lamp,
- a voice mail direct access key,
- a mute key.

Important!

The availability of certain functions described in this guide may depend on the version or
configuration of your system.
We would advise you to carry out the following test (after connecting the set) to find out the
version of the system to which your set is connected.
To find out the system's
software version
Intercepting a call
sent to a set in your
hunt group
If you would like to find out more about your set, we would advise you to consult the detailed
functions on the website
2
Succession 6500 ranges.
When the handset is replaced,
- press the
Your hear the ringing tone in the loudspeaker, inviting
you to dial the number and the lamp associated with
key glows on steady.
The indications and additional features which are
highlighted on the blue backgrounds of this guide are
especially intended for your attention.
Otherwise (you have to lift the handset before pressing
highlighted on a blue background in this guide are not
available with your current system version.
We would advise you to consult your system operator if
you are in any doubt.
Note:
different functions. However, these accesses may be customized
by the system operator (e.g. the call pickup function: standard
access by
case, your system operator will indicate in the dedicated space,
ou 541 the specific codes to access the different functions.
www.eads-telecom.com
User guide of M720
key.
key and to hear the ringing tone), the features
This document shows the standard access codes for the
- customized access by ). In this