Eads Telecom Connexity M720 Aide-Mémoire page 14

Masquer les pouces Voir aussi pour Connexity M720:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Connections
Accessory for the M720
The
M720
can be mounted on a wall. A wall-mounted installation kit is available as an option.
Consult your system operator.
Recommendations and safety
Caution – Do not install the equipment in a damp room or near a water outlet. The equipment
must be used at a temperature between 5°C and 45°C.
Telephone connection – This equipment can not be connected to the public network.
This equipment is designed to be installed with a private switching system of M6500 IP PBX
and Succession 6500 ranges.
The voltage on this network is classed TNV1 (Telephone Network Voltage) according to
standard EN 60-950.
CE marking – This certifies the conformity of the equipment with the
regulations which apply in accordance with the directive R&TTE 1999/5/EC.
Maintenance – Use a cloth which has been dampened in slightly soapy water then wipe with
a dry cloth. Your equipment will retain its new appearance if you do not use any solvents or
household cleaning products.
Description of your M720
Handset cord connector
Line cord groove for
desktop position
Option not available
Line cord connector
3

Publicité

Table des Matières
loading

Table des Matières