F.F. Group AB-600 EASY Notice Originale page 7

AB - 600 EASY
is maintained.
SAFETY POINTS FOR ASPIRATOR BLOWER
Do not collect still smoldering cigarette ashes,
f
freshly cut metals shaving, screws, nails and the
like.
Never block suction inlet and outlet.
f
PRODUCT DESCRIPTION AND SPECIFICATIONS
Read all safety warnings and safety instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
INTENDED USE
The aspirator blower is designed for blowing and
cleaning applications, as well as light suction pur-
pose.
TECHNICAL DATA
Article Number
Model
Rated voltage
Frequency
Rated power
No load speed
Max blowing rate
Weight
Protection class
IDENTIFICATION
1. Nozzle
2. Blast port
3. Trigger switch
4. Variable Speed Knob
5. Lock on button
6. Suction port
7. Dust bag
PRODUCT FEATURES
The numbering of the product features refers to the
illustration of the machine on the graphics page.
ASSEMBLY
WARNING
Before assembly, make sure that the tool is switched
off and unplug.
USE
MOUNTING THE NOZZLE FOR BLOWING
OPERATIONS
Insert the pin located inside the Nozzle into the
notch provided on the Blast Port. To lock Nozzle in
place, turn the Nozzle in the direction indicated. To
remove Nozzle, turn the Nozzle in the opposite di-
rection.
41 116
AB - 600 EASY
V 220-240V
Hz 50/60Hz
W 600
min 6.000 - 16.000
-1
m /min 3,5
3
Kg 1,6
/ II
MOUNTING THE NOZZLE AND DUST BAG FOR DUST
COLLECTION
For dust collection, mount the Dust Bag at the Blast
Port and Nozzle at the suction Port. To remove Dust
Bag and Nozzle, simply pull out by first turning in the
opposite direction.
Empty the Dust Bag frequently to ensure maximum
dust collecting efficiency. Adjust Variable Speed
Knob for different speed requirement.
When continuous operation is required, first depress
the switch and then the lock-on button and release
to disengage lock, squeeze and release switch.
WARNING
Continuous running of machine should not exceed 30
minutes.
REPLACING CARBON BRUSHES
Use a screwdriver to remove the brush holder cap.
Take out the worn carbon brush, insert the new one
and secure the brush hold cap.
WARNING
Remove and check the carbon brushes regularly. Re-
place when they wear down to the limit mark.
ACCESSORIES
The performance of your tool depends on the acces-
sory used. Manufacture accessories are engineered
to high quality standards and designed to enhance
the performance of your tool. By using these acces-
sories you will get the very best from your tool.
MAINTENANCE
Your tool has been designed to operate over a long
period of time with a minimum of maintenance. Con-
tinuous satisfactory operation depends upon proper
tool care and regular cleaning.
WARNING
Before performing any maintenance, switch off and
unplug the tool. Regularly clean the ventilation slots in
your tool using a soft brush or dry cloth. Regularly clean
the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
WARRANTY
This product is warranted in accordance with the legal/
country specific regulations, effective from the date
of purchase by the first user. Damage attributable to
normal wear and tear, overload or improper handling
will be excluded from the guarantee. In case of a claim,
please send the machine, completely assembled, to
your dealer or the service Centre for electric power
tools.
English | 7
www.ffgroup-tools.com