Environmental Protection - F.F. Group SPP 1100XF Notice Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
SPP 1100XF
BEFORE STARTING
Before starting for the first time, the pump has
to be filled through the delivery union with the
delivery liquid until it overflows.
SUCTION PIPING
Fit the water suction pipe so that it points up-
ƒ
wards towards the pump. Absolutely avoid fitting
the suction pipe higher than the pump (formation
of air bubbles in the suction pipe).
The suction and delivery piping must be fitted so
ƒ
as not to be able to apply any mechanical pressure
on the pump.
The suction valve should be situated at least 30cm
ƒ
below the bottom water level.
Suction pipes that are not airtight suck in air ob-
ƒ
structing suction of the water.
DELIVERY PIPING
During suction, the cut-off parts (sprayers, valves,
etc.) situated in the delivery piping has to be fully
open so that the air in the suction pipe can be free-
ly expelled.
MAINTENANCE INSTRUCTIONS
The irrigation pump is entirely maintenance-free.
Should the pump become blocked, first try rinsing.
Should it turn out that the blockage is due to the
inefficiency or complete absence of the filters, dis-
mantle the hydraulic section and thoroughly rinse
the interior, carefully reassemble and refit the filters
correctly before turning back on.
If there is a risk of frost, the pump has to be emp-
ƒ
tied completely.
When the pump is not going to be used for a long
ƒ
time, for instance in the winter period, it is recom-
mended to rinse out the pump thoroughly with
water, empty it completely and store it in a dry
place.
Before restarting, check whether the pump works
ƒ
freely by briefly connecting and discon-necting it.
Then fill the pump again with the delivery liquid
ƒ
and set it up for use.
CAUTION! In order to work, the pump
must always be filled with the delivery liq-
uid until it overflows!
CAUTION! The pump must never run dry.
The manufacturer's warranty is null and
void in the event of damage to the pump
caused by its running dry. Check that the
pump is airtight, in fact not airtight pipes
draw in air preventing the pump from work-
ing properly.

ENVIRONMENTAL PROTECTION

Information on the disposal of electric and
electronic equipment in compliance with
directive 2002/96 CE (RAEE).
Warning: do not use the normal house trash
bin to dispose of this product.
Used electric and electronic equipment
must be handled separately and in compli-
ance with the regulations relating to the
treatment, recovery and recycling of the
said products.
In accordance with the regulations applied
in the member States, private users resi-
dent in the EU can take used electric and
electronic equipment free of charge to des-
ignated collection centers.
If you experience difficulties in locating
an authorized disposal center, consult the
dealer from whom you purchased the prod-
uct.
The national regulations provide sanctions
against whoever unlawfully disposes of or
abandons waste of electric or electronic
equipment.
WARRANTY
This product is warranted in accordance with the
legal/country specific regulations, effective from
the date of purchase by the first user. Damage at-
tribut¬able to normal wear and tear, overload or
improper handling will be excluded from the guar-
antee. In case of a claim, please send the machine,
completely assembled, to your dealer or the service
center for electric power tools.
English |
5
www.ffgroup-tools.com

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

43 486

Table des Matières