Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
| English
ENGLISH
SAFETY MEASURES
Read carefully the operating instructions
before assembling and starting. The appli-
ance must not be used by operators who
are not thoroughly acquainted with the
instructions handbook (operating instruc-
tions). Moreover, the appliance must not be
used by persons under the age of 16.
The user is liable towards third parties in the area
f
where the appliance is in operation.
Before starting it is necessary to make sure that
f
the necessary electrical protection measures are
provided by means of a test carried out by a spe-
cialist.
While the pump is operating no operators
have to be in the liquid to be pumped.
The pump may be connected only by means
of a safety switch for fault currents, with
a rated opening current up to 30 mA and
a socket with an earth contact installed in
compliance with the regulations.
Protection: at least 10 Amps.
Operation in swimming pools and garden
ponds is not recommended.
For other operation, the provisions in conformity
with the standard VDE 0100 part 702 must be re-
spected.
CAUTION: Before checking, unplug the
pump from the mains!
Replacing the power supply cable requires using
f
special tools and therefore you must address to
the authorized after-sales service.
The noise (continuous equivalent in dbA) of the
f
motor-driven pumps is less or equal (≤) to 85 dbA.
The voltage indicated on the pump's rating plate
f
must correspond to the available mains voltage.
The temperature of the liquid conveyed must not
f
exceed 35°C.
Never attempt to lift or move the pump by
f
stretching the power-supply cable whilst it is
plugged into the mains.
Make sure that the plugged electrical connections
f
are in an area safe from flooding and are protect-
ed from humidity.
Before use it is necessary to check that the plug
f
and the mains connection line are not damaged.
Unplug from the mains before performing any
f
work on the pump.
Avoid directly exposing the pump to the jet of
f
water.
The user is responsible for complying with the lo-
f
cal regulations concerning assembly and safety.
The user by taking appropriate measures (e.g. in-
f
stalling an alarm, reserve pump and the like) will
have to exclude the possibility of indirect damage
caused by flooding premises due to failure of the
pump.
In the event of the pump failing, repair work may
f
only be carried out by the repair workshops of the
technical service. Only genuine spare parts must
be used.
It is notified that in conformity with the law on
f
product liability we cannot be held responsible
for the damage caused by our appliance:
1. Because of improper repairs not carried out by
the personnel of the assistance points autho-
rized by us; or
2. If genuine spare parts are not used to replace
parts; or
3. If the indications and provisions given in the
instructions handbook are not complied with.
The same provisions hold for the accessories.
RESISTANCE
This pump should not be used to convey inflam-
mable, combustible or explosive liquids.
TECHNICAL DATA
Article Number
Model
Voltage / Frequence
Output power
Sound power level
Max pressure
Max head
Max flow
1
DN
2
Weight
Protection
Insulation Class
USE
For irrigation and watering of lawns, gardens,
f
vegetable patches, etc.
For operating garden sprinkler systems
f
For drawing water from ponds, streams, water
f
butts and wells, subject to fitting of suitable filter.
ACCEPTABLE LIQUIDS
In order to pump clear water (fresh water), rainwa-
ter or non-aggressive chemical cleaning solutions.
Abrasive liquids or any other type of corrosive liq-
uid could damage or destroy the pump.
OPERATING INSTRUCTIONS
It is recommended to use a preliminary filter and
exhauster with a suction hose, suitable and foot
valve (reflux lock) to avoid long suction times and
pointlessly damaging the pump due to stones and
solid foreign bodies.
SPP 1100XF
43 486
SPP 1100XF
V
230
Hz
50
W
1100
dB(A)
85
bar
4,50
m
45
m
/h
4,6
3
inch
1
inch
1
Kg
10,5
IPX4
B
Publicité
Table des Matières
