Removing The Battery - DS Produkte TS-18439 Mode D'emploi

EN

Removing the Battery

1. Undo the screws on the housing of the device.
2. Open up the two halves of the housing slightly and remove the base (19).
3. The battery appears. First disconnect one connecting cable to the battery and then
the other. CAUTION: Do not disconnect both cables at the same time so that
there is not a short-circuit!
All rights reserved.
22
Customer Service / Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls to German landlines are
subject to charges. The cost varies
depending on the service provider.)