Device Overview; Attaching / Removing Attachments; Use - DS Produkte YS-8001-1 Mode D'emploi

Device Overview

9
8
7
6

Attaching / Removing Attachments

PLEASE NOTE!!
■ Always switch off the device and allow it to cool down before attaching or removing
accessories.
• Both attachments can be plugged directly onto the mounts on the right and left on the
main unit (3). They must engage audibly.
• To take the hanger attachments (4) off the main unit, press the small locking lug on
the bottom of a hanger attachment and pull it off at the same time.
• To take the shoe hanger attachments (6) off the main unit, simply pull them off.

Use

PLEASE NOTE!!
■ Always place the device with clear space above it and on all sides in a dry, stable,
moisture-resistant and heat-resistant place.
■ Do not hang the device in a wardrobe or similar space during operation.
■ It is essential that you follow the care labels for the textiles which are to be
dried!
Drying clothing
1. Attach the hanger attachments (4) to the main unit (3) (see the "Attaching / Removing
Attachments" chapter).
2. Release the hook for hanging up (1) on the back of the main unit and push it upwards.
3. Pull the item of clothing which is to be dried over the hanger.
When you do this, make sure that:
– a possible hood or high collar does not cover the upper ventilation slots (2),
15
1 Hook for hanging up
1
2 Upper ventilation slots
3 Main unit
4 Hanger attachment
2
5 Clips
6 Shoe hanger attachment
3
7 Ventilation outlet (on the
bottom of the main unit)
4
8 On / Off switch
9 Control lamp
5
EN