DS Produkte YPF-6150 Mode D'emploi page 17

The iron is not intended for regular use.
■
The iron must be used and placed down on a
■
stable surface.
The iron must not be used if it has been dropped,
■
if it has visible signs of damage or leaks.
If the connecting cable of this device is dam-
■
aged, it must be replaced by the manufacturer
or customer service department or a similarly
qualifi ed person in order to avoid any hazards.
CAUTION: hot surfaces! The bottom of the
iron gets very hot during use. You should
therefore only hold the device by the handle
when you are operating it. Do not touch the
bottom of the iron during or shortly after use.
Allow the device to cool down completely before
■
the water reservoir is emptied and / or the de-
vice is cleaned and stored away.
17 EN