Maintenance; Storage - Gardena 19031 Mode D'emploi

Manual operation by
Water Control:
4

5. MAINTENANCE

To clean the filter:
To clean Water Control:

6. STORAGE

To put into storage:
14
The valve can be opened or closed manually at any time (Only during
the pairing process is no manual irrigation possible). A program­
controlled open valve can also be closed early without changing the
program data.
1. Press Man.­button to open the valve manually (or to close an
open valve).
The LED Active Watering
2. Press Man.­button to close the valve early.
If the Water Control is in "Sleep Mode", press the Man.­button
2
2 times.
The watering duration (0 to 59 min.) is according to the parameter
of the GARDENA smart App.
If a program­controlled watering has been stopped manually,
this program­controlled watering cannot start again.
If the valve has been opened manually and a programmed start
of a watering period overlaps the manual opening period, the pro­
grammed starting time is suppressed.
Example:
The valve is opened at 9.00 a.m. manually, the opening period is
30 minutes. A program with a start time (START) between 9.00 and
9.30 a.m. will not be undertaken in this case.
(13)
The filter
necessary.
8
1. Unscrew sleeve nut
tap thread (do not use pliers).
2. If necessary unscrew the adaptor
e
3. Remove filter
4. Fit the Water Control again (see 3. INITIAL OPERATION
9
"To connect the Water Control" ).
No caustic / abrasive cleaning agents should be used.
v Clean Water Control with a damp cloth (do not use solvent).
The unit must be stowed away from children.
1. To preserve the batteries, these should be removed
(see 3. INITIAL OPERATION).
2. Stow the Water Control in a dry area where it has protection from
frost.
(2) is lighting green for 10 sec.
should be checked regularly and cleaned when
(9)
of the Water Control by hand from the
(13)
from sleeve nut
(8)
.
(9)
and clean.